Sly LLC Blog

How does a biomass dust collector work?

Topics: dust collection system, dust collector, biomass

June 8, 2023

Fertilizer for the garden. Dish detergent by the kitchen sink. Electricity to power lights over your workspace. These are a few examples in the vast and growing “bioeconomy,” which some studies say tops US $4 trillion. Moving from a fossil fuel-based to a biobased economy is expected to contribute...

Top Tips for Optimizing Dust Management for Lithium Processors

Topics: dust collection system, dust collector, lithium

June 6, 2023

Lithium is the lightest metal on the periodic table. However, some general characteristics remain. The properties of lithium dust can vary depending on its source, form, and processing conditions.

The Importance of Dust Safety in the Biomass Industry

Topics: dust collection system, dust collector, biomass

May 5, 2023

While biomass has existed since the earth was formed, the past few decades have witnessed an increased interest in using biomass stock in unique ways. These innovative ideas have created a distinction between “modern” and “traditional” biomass. Modern uses repurpose waste products with a biological...

Dust Safety in the Lithium Industry

Topics: dust collection system, dust collector, lithium

April 28, 2023

According to Fortune Business Insights, the global lithium mining market is projected to grow at least 6% for the next several years. This lightweight metal is inextricably linked to modern society’s move toward a lower carbon economic model. 

How Does a Lithium Dust Collector Work? 

Topics: dust collection system, dust collector, lithium

April 4, 2023

Dust is a concern in every industry, yet dust characteristics and industry needs differ, dictating varying approaches to its collection. Effective industrial dust removal improves plant safety, assists with plant maintenance, improves air quality and decreases potential health hazards. 

Top Reasons Why Biomass Dust Collection Demands a Customized Approach

Topics: dust collection system, dust collector, biomass

April 3, 2023

Nations around the globe are looking for alternative fuels that are renewable, carbon neutral and/or can be used to break fossil fuel dependency. Switching to biomass fuel sources can help reduce greenhouse gas emissions and contribute to sustainability goals. Biomass not only provides energy and...

Sanitary, Safe and Sensible—Designing the Best Baghouse Discharge System

Topics: dust collection equipment, dust collector replacement bags, bag filter cleaning

January 13, 2023

Whether building a new facility or instituting renovation and updates, there are important considerations when selecting a baghouse discharge system. The baghouse discharge system does more than eliminate nuisance dust. It can help improve worker safety by eliminating hazards, helping comply with...

Five Key Steps Towards Mitigating Combustible Dust Hazards

Topics: dust collection system, dust collector

December 1, 2022

A fine dust coating anywhere on equipment, ductwork or other areas of your facility means it is past time to institute proper housekeeping measures, and/or to evaluate the dust collection system. Even small quantities of dust, any accumulation, may be considered a workplace hazard depending on the...

Five Keys to Improving the Efficiency of Your Dust Collection System

Nothing to Sneeze At—5 Keys to Improving Dust Removal Efficiency

Topics: dust collection equipment, dust collection system, dust collector

August 26, 2022

There are at least five keys to help improve your dust collection system and greatly reduce if not eliminate these consequences by increasing dust collection efficiencies for a cleaner, safer work environment and enhanced product quality and production.

Should I Replace My Filter Bags or Clean Them?

Topics: dust collector replacement bags, dust filters, bag filter cleaning

June 1, 2022

Since we’ve been in the dust collection business for close to 150 years, it’s not surprising that we hear questions covering all aspects of this field. For example, we are often asked about cleaning filter bags in dry dust collectors. Is cleaning your filter bags a more cost-effective solution than...

Which to Choose: An ePTFE Membrane vs. a PTFE Finish?

Topics: dust collection equipment, dust collector system

May 2, 2022

One of the questions we are often asked is “In the case of filters, what's the difference Between an ePTFE Membrane vs. a PTFE Finish?”

The importance of having a maintenance program for your dust collector

Topics: dust collector inspection, dust collector maintenance

April 1, 2022

Improve safety, performance and reliability with our Maintenance checklist. The importance of having an inspection/maintenance program for your dust collector cannot be understated. Depending on the issue, dust collector down time caused by maintenance issues can be catastrophic, costing a...

Troubleshooting Basics for TubeJet® (Pulse-Jet) Dust Collection Systems

Topics: dust collection system

March 31, 2022

While dust collection systems and components are durable, they need proper maintenance to avoid problems down the road. Regular maintenance and thorough troubleshooting can prevent and help fix problems with your dust collector, reducing downtime, cutting costs, and improving productivity. It will...

The Importance of Wet Scrubber Efficiency

Topics: wet scrubber

March 10, 2022

Wet scrubbers remove particulates, vapors, and gases from the exhaust stream of a process. The goal for a wet scrubber is to remove over 99% of pollutants and particles. The smaller the particles in the waste stream, the more difficult the particles are to remove.

What are the advantages and disadvantages of using wet scrubbers?

Topics: wet scrubber

February 24, 2022

A wet scrubber is an effective means of cleaning or “scrubbing” particulates and chemicals from industrial exhaust gases. Because wet scrubbers use water or a water-based solution to collect pollutants from the exhaust stream, plant managers view the equipment as more complex than dry dust...

Total Dust Management

Topics: dust collector system, dust collectors, dust collector maintenance, industrial dust collector, wet scrubber, dry dust collector

February 1, 2022

Your Questions Answered in Our Must-See Video If you have a dust problem in your facility, you need a solution, but before you rush out and buy a dust collector system “off the shelf,” there are some things you need to consider. In fact, you should never rush into a dust collector purchase....

6 Signs of an Unsafe Dust Collection System

Topics: dust collection system, dust collector inspection, dust collector maintenance

December 7, 2021

Where combustible dust is a concern, there is only one sure sign that your safety protocols are working: zero safety incidents. But even a perfect past safety record is no guarantee that you will never have an incident in the future. Keeping your facility and your workers safe requires constant...

Industrial Dust and Dust Safety: Your Questions Answered

Topics: dust collection system, dust collector system, dust collectors, dust collector maintenance, industrial dust collector

November 9, 2021

As awareness of industrial dust and dust safety grows, so does the need for accurate information. Although it is not possible in this short article to answer every question, we hope the following list of frequently asked questions and answers will be helpful.

Pollution Control

Topics: dust collector system

October 12, 2021

Pollution Control: How to Determine if Your Facility Needs a Dust Collector When some people see the title to this blog, their knee-jerk reaction might be something like, “Wouldn’t it be obvious if I needed a dust collector?” Well, if your employees are gasping for breath due to the amount of dust...

How to Choose a Dust Collection System

Topics: dust collector system

September 21, 2021

Whether you’re a large commercial operation or a small business, managing dust collection is a serious consideration. There may be myriad (oftentimes contradictory) considerations, so the best solution is to consult with experts in the dust domain.

Dry vs. Wet: The Dust Collection Match-up

Topics: wet scrubber, dry dust collector

August 5, 2021

If you’re creating dust, you need a dust collector. Period.

What are the Key Factors to Consider When Getting a Wet Scrubber?

Topics: wet scrubber

July 27, 2021

Designing a dust collection system is all about matching a dust collector to your specific dust management needs. Just like with baghouses and dry dust collectors, choosing the right wet scrubber will come down to picking a scrubber that is uniquely designed for your application, dust and air...

From Design to Optimization: Everything You Need to Know About Wet Scrubbers

Topics: wet scrubber

July 6, 2021

Wet scrubbers help plant managers across various industries improve the air quality in their facilities. You can find wet scrubbers at work in many industrial facilities, as well as:

Which Dry Dust Collector is Best for My Application?

Topics: dust collection equipment, dust collector system, dust collectors, dry dust collector

June 8, 2021

You need a dust collector. The question is, which one? Only by picking the right kind of dust collector and customizing it to fit your needs can you maximize your system’s performance and dust collection efficiency while extending the life of your collector.

Why Do My Filter Bags Keep Failing?

Topics: air filter, dust filters, fabric filters, filter cleaning, bag filter cleaning

June 2, 2021

If you have a baghouse, your filter bag can make or break the performance and efficiency of your dust collection system. When filter bags fail, it can cause avoidable downtime and force you to get costly bag replacements – all of which can have a major impact on your bottom line.

Which Wet Scrubber is Right for my Application?

Topics: wet scrubber

April 26, 2021

Are you considering using a wet scrubber to improve your facility’s air quality control? With high collection efficiencies, explosion risk mitigation, and the ability to remove both dust and gases/vapors in one system, wet scrubbers are great for a variety of industrial applications. Paring the...

Finding the Best Wet Scrubber for Your Application

Topics: wet scrubber

April 21, 2021

Wet scrubbers are becoming increasingly popular in the industrial air quality control market. This is due to their ability to handle the industry’s more difficult pollutants, as well as combine particle and gas/vapor removal in a single system. When used correctly in the right applications, wet...

What is Total Dust Management?

Topics: dust collection equipment, dust collection system, dust collector system, dust collector maintenance, industrial dust collector

March 1, 2021

Do you have a dust problem? Are you concerned with the air quality in your facility? If so, then you need to use proper air quality control equipment, like a dust collector or wet scrubber, to ensure that you keep your site safe and maintain regulatory compliance.

How to Handle Conveyor Dust for Better Bulk Material Handling

February 4, 2021

If you’re moving product – especially fine or powdered bulk materials – chances are that you are creating a dust issue within your plant. From belt and screw conveyors to bucket elevators and scale hoppers, moving materials almost always generates some level of dust and fine particulate. This dust...

What Particles Does a Wet Scrubber Remove?

Topics: wet scrubber

January 27, 2021

If you have a problem with industrial air quality, then you need a dust collector. Finding the right one will depend on your air quality requirements and the particles that you’re dealing with.

How to Select the Correct Filter Media

Topics: dust collectors

October 26, 2020

Dust collectors are the primary choice for industrial air quality control. By increasing the safety of your site, protecting the health of your workers, and helping you to maintain regulatory compliance, dust collectors are vital to the success of your business. A baghouse can be structurally...

High vs Low Inlet Baghouses

Topics: baghouse, dry dust collector

October 19, 2020

When it comes to air quality control, nothing is more tried and tested than the humble baghouse. Used for over a century to capture airborne dust particles in industrial environments, baghouses and dry dust collectors help manufacturers keep their businesses cleaner and ultimately safer for their...

What is a Baghouse?

Topics: baghouse, dry dust collector, cartridge filters

September 9, 2020

Uncontrolled dust is a danger to your business. Not only are pollutants like dust and airborne dirt a threat to the safety of your workers, but they can also lead to issues and defects with your products. If things get bad enough, they can even cause equipment malfunctions and plant-wide shutdowns....

How to Meet NFPA 652 Standards

Topics: explosive dust, wet scrubber

August 11, 2020

Most every industrial application creates dust and other harmful particulate. To maintain safe levels of air quality and comply with regulatory agencies, particularly with combustible dust, you need a way to manage air quality control, like using a dust collector or wet scrubber.

3 Common Reasons to Use Wet Scrubbers

Topics: wet scrubber, venturi, impingement

May 26, 2020

When it comes to air quality, it’s important to choose the best air pollution collection system for your specific application. Choosing the right system can mean the difference between a safe, productive work environment, and a plant shutdown.

How Does a Packed Bed Scrubber Work?

Topics: wet scrubber

April 1, 2020

A common type of wet scrubber that industrial companies use is the packed tower scrubber. Packed tower scrubbers, also known as packed bed scrubbers or packed column scrubbers, are a type of wet scrubber specifically designed for the chemical scrubbing of gaseous contaminants from airstreams. These...

How Does a Venturi Scrubber Work?

Topics: wet scrubber, venturi

February 5, 2020

Air quality control is important to the success of every business, especially ones with industrial applications. The best way to maintain a high level of air quality is by using dust collection equipment.

The 3 Most Common Types of Wet Scrubbers

Topics: wet scrubber

October 9, 2019

Since the types and mechanisms of air pollution are always changing, the equipment used to control the air pollutants that we make must change and evolve as well.

5 Ways to Increase Industrial Air Quality Control

Topics: dust collector system

September 4, 2019

Air pollution management is important. With particulate matter linked to over 30,000 deaths a year in the US alone, air quality control systems are essential to keeping manufacturing environments cleaner and safer. The Clean Air Act clearly shows the federal pressure we all face for a cleaner (and...

How to Change-Out Your Sly Envelope Style Dust Collector Bag

Topics: Dust Collector Repair, dust collector inspection, bag filter cleaning

August 14, 2019

At Sly we often receive questions from callers about the right way to change-out the filter bags on their dust collectors. While it’s a detailed process, learning how to change-out your envelope filter bags will save you both time and money otherwise spent replacing them earlier than necessary....

[Infographic] The Sly Difference in Dust Collection

Topics: dust collectors

July 30, 2019

At Sly, what makes us different from other dust collection vendors is what makes us better. We work closely with our customers to design and maintain their dust collection systems. With nearly 150 years of experience, we're your trusted resource for dust collection solutions.

How to Properly Start Up Your Dust Collector or Baghouse

Topics: dust collectors, baghouse system, dust collector maintenance

July 17, 2019

Learning the right way to start up your dust collector or bag house will optimize performance, help initial blinding, and extend the life of your dust collector’s new filters. Let’s review the proper start-up procedures for new dust collectors and for those with new filter bags installed.

Pocket Guide: Wet Scrubber Basics

Topics: wet scrubber, venturi

June 12, 2019

Wet scrubbers come in a variety of types and shapes, but all are basically designed to remove gases/vapors and particulates from the exhaust from process equipment like furnaces, dryers, mixers, bagging stations, etc. They’re often the best option for handling combustible particulates because they...

Cleaning Up with Cartridge Filters: Dust Collector Filter Cleaning

Topics: filter cleaning, cartridge filters

May 8, 2019

For indoor dry dust collector installations, cartridge dust collectors are often the best option for applications where the dust is dry and can flow freely, such as in chemical processing, minerals, blasting, welding, plasma cutting, dry powder handling, and metal finishing. But cartridge filters,...

What is a Wet Scrubber?

Topics: wet scrubber

March 13, 2019

A wet scrubber is a mechanical system that removes pollutants from an air stream by bringing it in contact with a scrubbing liquid, most often water. Wet scrubbers are generally the only single air pollution control device that can remove both particulates and gases/vapors. They are highly...

Wet vs. Dry Systems: Which Is Best for Your Air Pollution Control Challenge?

Topics: baghouse, wet scrubber, venturi, dry dust collector

January 9, 2019

Air pollution control systems fall into two main categories: wet scrubbers and dry dust collectors (including both baghouses and cartridge collectors). Each type has its place, but determining which is best for a particular application does require careful consideration.

When Should You Use an ePTFE Membrane Filter Bag?

Topics: dust collector replacement bags, dust filters, baghouse

November 12, 2018

Any operation that uses a baghouse dust collection system must weigh the advantages and disadvantages of the numerous baghouse filter options available in the market today. The type of filter bag you’ll need to operate at maximum effectiveness and efficiency will depend on the baghouse design, the...

Infographic: How to Design a Dust Collection System

Topics: dust collection system, industrial dust collector

October 30, 2018

Dust collection systems are essential in many industrial facilities for adhering to clean air standards. Do you know the basics of designing a dust collection system?

Preventing Dust Explosions: Considerations for Weighing Your Dust Control Options

Topics: explosive dust, wet scrubber

October 24, 2018

Industrial dust explosions don’t “just happen.” Too many manufacturers don’t consider the combustibility of the dust their processes may be creating when weighing their dust control options.

Avoiding Costly Baghouse Repairs: Dust Collector Preventative Maintenance Checklist

Topics: baghouse, dust collector maintenance

September 5, 2018

Following procedures and performing maintenance is essential to ensuring safety and performance in industries ranging from aviation to medicine; not surprisingly, it is also true for dust collection. To ensure that a baghouse continues to run efficiently and to protect people and equipment,...

Dust Collector Sizing: What Size Do You Need?

Topics: dust collector system

August 22, 2018

A dust collection system is essential to any manufacturing process that creates nuisance or harmful contaminants in a confined environment. A dust collector filters particulates from factory air, collects the dust for disposal, and returns clean air to the environment. Alternatively, the dust...

3 Reasons to Replace Your Dust Collector Filter Bags

Topics: filter cleaning, bag filter cleaning

August 8, 2018

Changing a dust collector’s filter cartridges or baghouse’s filters too early adds unnecessary expense and takes up maintenance time that could be better spent on more urgent tasks. Changing a filter too late runs the risk of exposing workers in the facility to hazardous dust and the potential for...

Design Considerations for Your Next Dust Collection System

Topics: dust collector system

June 26, 2018

The process of designing a system requires a comprehensive look at all of the specifics of the application and environmental requirements. The basic components of dust collection system design can be broken down into three areas:

How to Monitor Baghouse Health Through Differential Pressure

Topics: baghouse, baghouse system

June 12, 2018

Differential pressure measurements provide a reliable metric of baghouse performance. Just as a doctor uses a thermometer to check for fever, so too can maintenance personnel use gauges to measure pressure drop across a baghouse. When the differential pressure readings fall too high or too low,...

The Baghouse Insider: Separating Dust from Air

Topics: baghouse

May 29, 2018

Dust Removal: The Essential Function of a Baghouse When an industrial process generates dust, that dust may become entrained in the air. A baghouse is the go-to solution for controlling airborne dust, also called particulates, for a healthier, more productive manufacturing environment with less...

SLY, INC. ANNOUNCES NUMBER ONE SALES TERRITORY OF 2017

Topics: News

May 24, 2018

May 2018 — Sly, Inc., a 144 year old manufacturer of dust collectors and other air pollution equipment congratulates Carolina/Virginia representative office Whitlock Industrial Equipment for achieving the number one sales territory of 2017. Sly’s Wet Scrubber Product Manager Dwayne Sanders...

Sly’s Customized Dust Collection System Resolves AVEKA's Unique Predicament

Topics: wet scrubber

February 19, 2018

Most factories require dust collection systems for employee safety and compliance with environmental regulations. Sometimes there are a number of factors to consider, including unique challenges or restrictive space constraints. This was the case with AVEKA, who reached out to Sly for help with...

Electrostatic Precipitators vs. Baghouse Dust Collectors

Topics: dust collection system, baghouse

December 22, 2017

A search for dust collection solutions will turn up a number of possible technologies. One of the more common questions we receive is about electrostatic precipitators (ESPs). In this blog post, we will define what an ESP is, and explain the primary reasons most companies have moved away from...

When a Cartridge Collector Just Won’t Do, Air Pollution Control Contractors Need a Baghouse Solution

Topics: baghouse

November 30, 2017

For many dust collection system installers and air pollution control (APC) contractors, cartridge collectors represent the “bread and butter” of their business. However, the main limitation of these collectors is they are only designed to handle lighter dust loads, like those associated with light...

What You Need to Know About Wet Scrubbers

Topics: wet scrubber

November 28, 2017

When most of us think about industrial dust collection, we think of dry dust filtration equipment. However, there are wet scrubbers that may be a better solution for controlling plant emissions and air pollution in many situations.

Dust Collector Filter Cleaning: Compressed Air Requirements for Cleaning Bag Filters

Topics: dust collection system, bag filter cleaning

November 21, 2017

If you operate a pulse-jet dust collector system, you need to keep the filter bags clean. This requires a reliable source of compressed air to pulse-clean the bags. But how much compressed air do you need? This will depend on how many bags you are cleaning, their diameter and their length.

What You Need to Know About Venturis and Dust Collection

Topics: dust collection system, venturi

November 16, 2017

You’ve probably heard of a venturi, but do you know what it actually is or how it relates to dust collection? Let’s start with the basics. The Mirriam-Webster dictionary defines “venturi” as:

tree-nature-branch-winter-plant-leaf-374226-pxhere.com.jpg

Is Your Dust Collection System Ready for a Change in Seasons?

Topics: dust collection system

November 14, 2017

As summer gives way to autumn, you may notice a little nip in the air (depending on where you are). Leaves changing color, the start of football season and pumpkin-flavored everything are sure signs of the change in the season. While enjoying these, it’s also a good time to consider the challenges...

Should You Customize Your Dust Collection System Design?

Topics: dust collection system

November 1, 2017

Sourcing a dust collection system means considering a variety of factors: wet or dry, efficiency levels, space constraints, pressure levels, energy consumption and more. Another question that engineers have to consider is whether to buy an off-the-shelf dust collection system or configure a...

How to Determine Wet Scrubber Costs for Your Next System Design

Topics: wet scrubber

October 17, 2017

Budgeting for a wet scrubber system can seem like an overwhelming task when you install one only every few years. When building a budget for the project, not only do facilities engineers and operations staff have to consider the many equipment options available, but they also have to keep in mind...

What to Look for When Evaluating a Wet Scrubber Quote

Topics: Blog, wet scrubber

August 8, 2017

When evaluating quotes from wet scrubber manufacturers, it is best to watch out for a few important details and approaches. Not every quote is prepared with the same level of detail, so it becomes tough for an engineer or plant manager to lay them alongside each other and see an apples-to-apples...

SLY, INC. ANNOUNCES NUMBER ONE SALES TERRITORY OF 2016

Topics: News

May 4, 2017

CLEVELAND, OH — May 2017 — Sly, Inc., (www.slyinc.com), a 143 year old manufacturer of dust collectors and other air pollution equipment congratulates Oklahoma representative office Osborn Equipment Sales for achieving the number one sales territory of 2016. Sales Engineer Dave Mosinski presented...

Venturi Scrubbers, Physics & The Big Bang Theory

Topics: Blog

December 15, 2016

Did you know Sly has a full, in-house engineering team of design experts?

Meet the Sly Inc. Team!

Topics: Blog

November 8, 2016

Windsor Wire, LLC Announces Launch of New Website

Topics: News

November 2, 2016

STRONGSVILLE, OH — October 2016: Windsor Wire LLC, (www.windsorwire.com), a wholly owned subsidiary of Sly Inc (www.slyinc.com), a 142 year-old manufacturer of dust collectors and other air pollution equipment, is excited to announce the launch of a new web site. Windsor Wire collaborated with Page...

Mercury Gas Removal in Cement Kiln Exhausts

Topics: Blog, wet scrubber

October 13, 2016

In 2015, Mercury Capture Systems (MCS) in Newtown, CT installed a proprietary process system for naturally reducing mercury gas in cement kiln exhausts. A Sly Inc. Impinjet® wet scrubber is an integral part of this process.

WINDSOR WIRE, LLC EXPANDS CAGE MANUFACTURING CAPABILITIES

Topics: News

August 31, 2016

STRONGSVILLE, OH — July 2016 — Windsor Wire LLC, (www.windsorwire.com), a wholly owned subsidiary of Sly Inc., a 142 year old manufacturer of bag house dust collectors and other air pollution equipment, has acquired the cage manufacturing assets of Midwesco Filter Resources Inc. (MFRI.) This...

When should I get a wet scrubber instead of a baghouse?

Topics: dust collector, baghouse, Blog, wet scrubber

August 16, 2016

Though dry dust collectors are the most popular form of air pollution control (APC), there is no single answer to today’s APC problems. In many cases, a wet scrubber may work better than a baghouse, even for dry dust.

How to Ensure NFPA and OSHA Compliance in Your Dust Collection System

Topics: dust collection system, dust collector, dust collector system, Blog, osha compliance

August 5, 2016

As anyone who operates a facility can tell you, complying with safety rules and requirements is not just a moral obligation, it’s hugely important to company success.

SLY, INC. ANNOUNCES SALES DEPARTMENT TRANSITION

Topics: News

July 21, 2016

Dave Mosinski CLEVELAND, OH — June 2016 — Sly, Inc. (www.slyinc.com) is pleased to announce two new transitions within the Sly Sales Department. Longtime employee Dave Mosinski is moving to the role of Sales Engineer supporting the Dry/Spout end user segment. Over the years, he has held various...

The Role of Dust Collectors in Cement Production

Topics: dust collectors, Blog, cement dust, cement production

July 20, 2016

The production of Portland cement makes up approximately 90% of the total cement produced in the U.S. The main raw materials categories used to make Portland cement are lime, silica, alumina, and iron, but the process also consists of byproducts from other industries such as power plant fly ash,...

Sly Inc.’s Top 5 Most Viewed Videos of All Time

Topics: dust collection system, dust collector, Blog

July 13, 2016

Sly Inc. has a YouTube channel not only designed to showcase our products and company, but to provide tutorials and explanations on how to operate some of our basic offerings. Over the years, we have accumulated over 20,000 views. Here are our top five videos of all time from our YouTube channel.

SLY, INC. ANNOUNCES NEW SCRUBBER PRODUCT MANAGER

Topics: News

June 28, 2016

Dwayne Sanders, Scrubber Product Manager CLEVELAND, OH — June 2016 — Sly, Inc., (www.slyinc.com) is pleased to announce the addition of a new permanent employee. Dwayne joined Sly in June 2016 in the role of Scrubber Product Manager. Dwayne is a Chemical Engineer and has over thirty years of...

How to Optimize Interstitial Velocity on Dust Collectors

Topics: interstitial velocity, Blog

June 13, 2016

When sizing a pulse-jet dust collector, it is important to consider not just air-to-cloth ratio but also interstitial velocity. High levels of interstitial velocity in a dust collector can lead to unnecessary complications preventing efficient facility operations and process performance. Thus, it...

SLY, INC. ACQUIRES CAGE MANUFACTURING OPERATION

Topics: News

June 10, 2016

CLEVELAND, OH — March 2016 — Windsor Wire LLC, (www.windsorwire.com), a wholly owned subsidiary of Sly Inc., a 142 year old manufacturer of dust collectors and other air pollution equipment, has acquired the cage manufacturing operation for industrial environmental equipment formerly owned by...

Sly 2016 Powder Show Recap

Topics: powder show, Blog

June 8, 2016

Pictured: Wendy Nora, OEM Sales Director for Sly, Bill Kurz (center), Vice President of Sly, and Joe Caccamese, a Sly sales representative with Cino Equipment pose at the Sly Powder Show luncheon.

Sly, Inc. Announces Number One Sales Territory of 2015

Topics: News

May 23, 2016

Harvey Kinsey, Bill Kurz, & Bob Jeremias CLEVELAND, OH — January 2016 — Sly, Inc., (www.slyinc.com), a 142 year old manufacturer of dust collectors and other air pollution equipment congratulates Alabama, Georgia, and Louisiana representative office TEC Engineering for achieving the number one...

Six Fabric Filters for Regular Temperature Applications

Topics: dust filters, fabric filter, fabric filters, Blog

May 2, 2016

When selecting a fabric filter for any regular temperature application (0°-275°), it’s important to take characteristics and resistances of all fabrics into consideration. Though polyester is the most commonly used filter media, many fabric types are more suited to specific applications. Please...

Detecting Leaks in Your Baghouse System Through Dye Testing

Topics: dust collector, baghouse, baghouse system, Blog, dust collector leak

April 25, 2016

Leaks in a baghouse system can be detrimental to facility operations by causing loss in product and endangering workers. Keeping your dust collection equipment in proper operating condition is essential to maintaining compliance with EPA and OSHA regulations as well as maximizing product recovery.

How to Design Screw Conveyors on Baghouses Handling Explosive Dust

Topics: baghouse screw conveyors, dust collector, dust collectors, explosive dust, screw conveyors, Blog

April 11, 2016

[gallery link="post"] Nearly all dusts are combustible, except those known to be inert and having a Kst value of zero (like limestone, fume silica and rock dust). If your company is questioning the combustible potential of a dust they are handling, it is strongly recommended to have it tested by a...

Troubleshooting Common Dust Collector Problems

Topics: dust collector, Dust Collector Repair, Blog, dust collector maintenance

April 4, 2016

Having problems with your dust collector? A faulty collector can lead to a shut-down with costly downtime and airborne dust can threaten employee health and safety. Collectors running inefficiently can increase utility costs when valves leak pricey compressed air and fans begin to work overtime to...

5 Steps For Storing Your Dust Collection Equipment Long-Term

Topics: dust collection equipment, Blog

March 14, 2016

Long Term Storage Procedures – Storage In Excess Of 1 Month Long-term storage procedures are used to prevent damage to and preserve the operational capabilities of dust collection equipment that cannot be immediately installed when received at the job site.

Post-Fire Inspection Procedures for Your Dust Collector

Topics: dust collector, Blog, dust collector fire, dust collector inspection

March 7, 2016

A fire in your dust collector can be both dangerous and devastating to your manufacturing facility. If a fire does occur, it’s important to repair the damage so you can resume production and take preventative steps as quickly as possible.

Sly, Inc. Announces Winner of 2015 TRAILblazer Award

Topics: News

January 26, 2016

CLEVELAND, OH — January 2016 — Sly, Inc., (www.slyinc.com), a 142 year old manufacturer of dust collectors and other air pollution equipment, has announced the winner of its 2015 TRAILblazer award. Sly Incorporated’s TRAILblazer award is given annually to an individual who exemplifies the Sly...

Prepare Your Industrial Manufacturing Facility for Fall

Topics: dust collector, dust collector replacement bags, fall productivity tips, Blog, industrial dust collector

September 2, 2015

As the temperature begins to get cooler and the days start getting shorter, there’s no denying that Fall is on its way. For many, Fall marks the beginning of the busiest season of the year, when kids go back to school, and those of us in the manufacturing industry begin our push to make the months...

Filter Fabric Feature | Discover the Benefits of Polyester Felt

Topics: air filter, dust collector, polyester felt, polyester felt filter, Blog

August 25, 2015

In the world of air filtration, no two products are equal. Here at Sly Inc., we take great pride in the high caliber of dust collection and air pollution control products we produce; but with our extensive variety comes a great range of options. We firmly believe that it’s these options that allow...

SLY, Inc. Announces New Representation in Minnesota Territory

Topics: News

April 21, 2015

CLEVELAND, OH — April 2015 — Sly, Inc., (www.slyinc.com), a 141 year old manufacturer of dust collectors and other air pollution equipment, is pleased to announce a new sales representative firm in the Minnesota territory. Jeff Kinnunen and Juri Loutchko Midwest Equipment Solutions of Minnesota is...

Sly, Inc. Launches New Website

Topics: News

April 10, 2015

Sly Inc. invites visitors to explore their new website that has been designed to provide the ultimate user-friendly experience. With easy to use navigation and improved functionality throughout, the new website allows easy access to detailed product information and educational resources. April 10,...

SLY, Inc. Announces New Representation in Northern Ohio Territory

Topics: News

February 12, 2015

CLEVELAND, OH — February 2015 — Sly, Inc., (www.slyinc.com), a 140 year old manufacturer of dust collectors and other air pollution control systems, is pleased to announce a new sales representative in the Cleveland territory. Bulk Tec Equipment, Inc. of Pittsburgh, Pennsylvania is now representing...

Sly, Inc. Announces New Representation in California Territories

Topics: News

August 29, 2014

CLEVELAND, OH — August 2014 — Sly, Inc., (www.slyinc.com), a 140 year old manufacturer of dust collectors and other air pollution equipment, is pleased to announce a new sales representative in the California based LA and SAN territories. Otto Engineering & Sales of Oakdale, California is now...

October 2014 – Fall Milling & Material Handling Expo

Topics: News

August 13, 2014

Sly, Inc. is co-hosting Hosokawa’s free, in-house demonstration on milling and material handling for chemical, food, pharmaceutical, and mineral applications. The event will be held on October 14 and October 15 (offered twice for convenience) at Hosokawa’s Summit, New Jersey facility.

Wet Scrubbers and the Environment

Topics: B.H.A.G. Blog

April 30, 2014

When it comes to environmental awareness and conservation, businesses that utilize the newest wet scrubber and dust collection technology from Sly Inc are ahead of the curve. Wet scrubbers are one of the most effective modes of removing particles of air pollution from industrial exhausts. The dirty...

Dry Filter Systems for All Applications

Topics: B.H.A.G. Blog

April 24, 2014

Pulse Jet Collectors

Sly, Inc. Announces New Employee in Engineering Department

Topics: News

February 28, 2014

CLEVELAND, OH — February 2014 — Sly, Inc., (www.slyinc.com), a 140 year old manufacturer of dust collectors and other air pollution equipment, is pleased to announce that Frank Garza has rejoined the Sly Incorporated Engineering Department on February 3rd 2014. Frank was previously with SLY for 6...

Sly, Inc. Announces Winner of 2013 TRAILblazer Award

Topics: News

January 31, 2014

CLEVELAND, OH — January 2014 — Sly, Inc., (www.slyinc.com), a 140 year old manufacturer of dust collectors and other air pollution equipment, has announced the winner of its 2013 TRAILblazer award. Sly Incorporated’s TRAILblazer award is given annually to an individual who exemplifies the Sly...

Dust Collection Blog

Stay Up to Date on the Latest from Sly

Subscribe

Close

Explore by Topic:

More Topics ▼

How does a biomass dust collector work?

Read More

Top Tips for Optimizing Dust Management for Lithium Processors

Read More

The Importance of Dust Safety in the Biomass Industry

Read More

Dust Safety in the Lithium Industry

Read More

How Does a Lithium Dust Collector Work?

Read More

Top Reasons Why Biomass Dust Collection Demands a Customized Approach

Read More

Sanitary, Safe and Sensible—Designing the Best Baghouse Discharge System

Read More

Five Key Steps Towards Mitigating Combustible Dust Hazards

Read More

Nothing to Sneeze At—5 Keys to Improving Dust Removal Efficiency

Read More

Should I Replace My Filter Bags or Clean Them?

Read More

Which to Choose: An ePTFE Membrane vs. a PTFE Finish?

Read More

The importance of having a maintenance program for your dust collector

Read More

Troubleshooting Basics for TubeJet® (Pulse-Jet) Dust Collection Systems

Read More

The Importance of Wet Scrubber Efficiency

Read More

What are the advantages and disadvantages of using wet scrubbers?

Read More

Total Dust Management

Read More

6 Signs of an Unsafe Dust Collection System

Read More

Industrial Dust and Dust Safety: Your Questions Answered

Read More

Pollution Control

Read More

How to Choose a Dust Collection System

Read More

Dry vs. Wet: The Dust Collection Match-up

Read More

What are the Key Factors to Consider When Getting a Wet Scrubber?

Read More

From Design to Optimization: Everything You Need to Know About Wet Scrubbers

Read More

Which Dry Dust Collector is Best for My Application?

Read More

Why Do My Filter Bags Keep Failing?

Read More

Which Wet Scrubber is Right for my Application?

Read More

Finding the Best Wet Scrubber for Your Application

Read More

What is Total Dust Management?

Read More

How to Handle Conveyor Dust for Better Bulk Material Handling

Read More

What Particles Does a Wet Scrubber Remove?

Read More

How to Select the Correct Filter Media

Read More

High vs Low Inlet Baghouses

Read More

What is a Baghouse?

Read More

How to Meet NFPA 652 Standards

Read More

3 Common Reasons to Use Wet Scrubbers

Read More

How Does a Packed Bed Scrubber Work?

Read More

How Does a Venturi Scrubber Work?

Read More

How Does a Lithium Dust Collector Work? 